Getting Started

Monitor the system for the first six weeks for optimum results.

After initial installation of the Aligator system, or when the water in the pool has been changed, chemical dosing of the pool with chlorine should still take place, gradually reducing the amount used until a chlorine level of 0.8ppm is reached.

This should take place over a period of 4 to 6 weeks, in order for the Aligator to "charge" the pool with positive ions and kill any algae and bacteria present in the water during the start up period.

Electrode Monitoring

Monitor the colour of the Aligator electrodes once a week. If the system is working properly, the electrodes will be a blue/green colour. Should any white scaling appear, simply remove it gently with a soft, clean cloth. Continue to check the balance of the water once a week and adjust accordingly.

Vacuuming and Backwashing

During the first six weeks, especially the first two, frequent vacuuming and backwashing is needed to clear away the residue of solids being created by the purifying action of the Aligator. It is this action that makes the water crystal clear.

After a period of time, which will vary depending on how contaminated the water was before Aligator was fitted, no more solids will be visible on the bottom of the pool. At this point vacuuming and backwashing may be resumed at normal frequency.

Ongoing visual inspection and frequent vacuuming and backwashing is essential for the good management of your pool.